Teak Boats

Boats and Ships with teat decking and/or teak trim

Does TeakGuard make decks slippery when wet?
The answer is a qualified NO! If applied correctly, per the manufactures directions,  TeakGuard finish does not produce a slippery finish. However, any smooth surface (when wet) can be very slippery because water trapped under your feet cause them to hydroplane.

We (AllGuard products)  have done all the research and have been around since 1982. We come across this question often and do a pretty good job of explaining how to prepare the teak deck prior to applying the teak guard product. We have a whole section in the ‘Teak Guard Manual” that goes in-depth so I recommend you review it there

Click on to http://www.allguardproducts.com/ and then on the left side of the page there is a PDF file ”TeakGuard Manuals” . On page 4 Swim Platforms, Decks and Steps are addressed. The key is in the preparation so read the book. TeakGuard Finish is not naturally slippery, but any smooth surfaces will promote hydro-planing, resulting in falls and injuries. So its a good idea to walk cautiously on any wet deck.

Tags: ,

I am sure you know by now that teak is a very unique wood. The naturally occurring oils that saturate teak wood are both a blessing and curse.

The blessing is: Teak’s very heavy oils greatly retard the tendency of the wood to rot or become vulnerable to bugs and worms. They also give teak the beautiful color and texture we all love. Leaving unprotected teak in the sun brings these natural oils to the surface, where they dry (oxidize) to a what some consider a lovely gray.

The curse is: Because teakwood is saturated with a very heavy oil, it can not breathe like most non-oily woods do. As a result, even tiny amounts of water, trapped between a sealing finish and the wood will vaporize when exposed to the Sun and cause a great deal of pressure to accumulate between the wood and the sealer.

Eventually and generally within a few weeks of hot sunny weather, the UV light makes the sealer brittle and small shiny blisters and/or tiny cracks begin to appear. These cracks allow the water vapor to except during the day, but, at night when the dew forms on the sealer and the temperature falls, water (dew) is drawn into these cracks as the air and remaining water vapor between the sealer and wood begin to cool and contract. As this cycle continues the cracks get larger, the areas of sealer not adhered to the wood grow and begin to peel off. The exposed teak, now open to the air and sun, will allow the teak oil to oxidize and turn gray. Additionally, the unprotected teak is open to mold growth and the associated discoloration.

TeakGuard Finish stands alone in that it allows moisture (water vapor) to escape by “breathing”, while at the same time sealing in the woods natural oils and protecting them from oxidization and discoloration caused by UV light.

TeakGuard’s combination of UV absorbers and reflectors, provide a high degree of protection from ultraviolet rays, to further extend the life of both the TeakGuard finish and the wood.

TeakGuard’s polymer resin do not support mold or mildew growth, but if mold is left on the wood during the cleaning and preparation process, it will continue to grow on the wood under the TeakGuard.

Tags: , ,

Newer entries »